Bosch SPS53E12GB, Руководство по эксплуатации

Страница: 22 / 40

en Operating the appliance
22
Timer programming
Timer programming *
* depending on model
You can delay the start of the
programme in 1-hour steps up to
24 hours.
1. Close the door.
2. Switch on ON/OFF switch
(
.
3. Press button
@
+ until the digital
display
)"
jumps to
œ
:
‹‚
.
4. Press
@
+ or – button until the
displayed time corresponds with your
requirements.
5. Press START button
P
, timer
programming is activated.
6. To delete timer programming, press
the
@
+ or – button until
)"
œ
:
‹‹
is indicated on the digital display.
You can change your programme
selection at any time until the
programme starts.
End of programme
The programme has ended when the
value
‹
:
‹‹
is indicated on the numerical
display
)"
.
Switching off automatically
after the end of
the programme *
Switching off automatically after the end of the programme
* depending on model
To save energy, the dishwasher is
switched off 1 minute after the
programme ends (factory setting).
Automatic disconnection
can be adjusted from
˜
:
‹‹
to
˜
:
‹ƒ
.
1. Close the door.
2. Switch on ON/OFF switch
(
.
3. Hold down programme button
#
and press START button
P
until
•
:
‹
... is indicated on the digital
display.
4. Release both buttons.
The LED for button
#
flashes and
the digital display
)"
displays the
factory setting
•
:
‹…
.
5. Press programme button
#
until
the factory set value
˜
:
‹‚
is indicated on the digital
display
)"
.
To change the setting:
1.
Press programme button
3
.
Each time the button is pressed, the
set value increases by one level;
when the value of
˜
:
‹ƒ
has been
reached, the display jumps back
to
˜
:
‹‹
(off).
2. Press START button
P
.
The set value is saved.
˜
:
‹‹
Appliance does not switch off
automatically
˜
:
‹‚
Off after 1 min
˜
:
‹ƒ
Off after 120 min