en
Home Connect
40
Basic setting
Display text
Selection
Description
Remote Start
rc:01
rc:00 - rc:02
Activate or deactivate
.
The following settings are possible:
¡
With the setting "rc:00", the func-
tion is permanently deactivated.
¡
With the setting "rc:01", the func-
tion can be selected via the
button.
¡
With the setting "rc:02", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the Home Connect app.
Factory setting
rE:
Start with
Y:ES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Open the appliance door.
2.
Press .
3.
To open the basic settings, press
for 3 seconds.
a
The display shows H:xx.
a
The display shows
.
4.
Press
repeatedly until
the display shows the required set-
ting.
5.
Press or repeatedly until the
display shows the right value.
You can change several settings.
6.
To save the settings, press
for 3 seconds.
7.
Close the appliance door.
Home Connect
Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the Home Connect app.
¡
WLAN home network (Wi-Fi)",
Page 41
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
