en
Troubleshooting
58
Fault
Cause
Troubleshooting
Appliance stops during the
programme or cuts out.
▶
Arrange the tableware so that no
parts project beyond the basket
and prevent the appliance door
from closing properly.
All LEDs lit up or flashing.
Electronics have detected a
fault.
1.
Press the main switch button for ap-
prox. 4 seconds.
The appliance is reset and restar-
ted.
2.
If the problem occurs again:
‒
Switch off the appliance.
‒
Pull out the mains plug or
switch off the fuse in the fuse
box.
‒
Wait at least 2 minutes.
‒
Switch on the fuse in the fuse
box or insert the mains plug.
‒
Switch the appliance on.
3.
If the problem occurs again:
‒
Contact customer service.
Mechanical damage
Fault
Cause
Troubleshooting
Appliance door cannot be
closed.
Door lock has been activ-
ated.
▶
Close the appliance door with
greater force.
Door cannot be closed due
to installation method.
▶
Check whether the appliance has
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.
Lid on the detergent dis-
penser cannot be closed.
Detergent dispenser or lid
are blocked by sticky deter-
gent residue.
▶
Remove detergent residue.
Содержание SMV6EDX57E
Страница 64: ...en Declaration of Conformity 64 AL BA MD ME MK RS UK UA 5 GHz WLAN Wi Fi For indoor use only ...
Страница 65: ......
Страница 66: ......
Страница 67: ......