background image

Troubleshooting

 en

59

Fault

Cause

Troubleshooting

All LEDs lit up or flashing.

Electronics have detected a
fault.

1.

Press the main switch button for ap-
prox. 4 seconds.

→ 

"Controls", Page 16

The appliance is reset and restar-
ted.

2.

If the problem occurs again:

Switch off the appliance.

Pull out the mains plug or
switch off the fuse in the fuse
box.

Wait at least 2 minutes.

Switch on the fuse in the fuse
box or insert the mains plug.

Switch the appliance on.

3.

If the problem occurs again:

Contact customer service.

→ 

"Customer Service",

Page 62

Mechanical damage

Fault

Cause

Troubleshooting

Appliance door cannot be
closed.

Door lock has been activ-
ated.

Close the appliance door with
greater force.

Door cannot be closed due
to installation method.

Check whether the appliance has
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.

Automatic door opening is
not in home position.

Wait for a second after opening the
appliance door.

Lid on the detergent dis-
penser cannot be closed.

Detergent dispenser or lid
are blocked by sticky deter-
gent residue.

Remove detergent residue.

Noise

Fault

Cause

Troubleshooting

Filling valves making knock-
ing noises.

Caused by the domestic in-
stallation. No appliance fault
present. Does not affect
functioning of the appliance.

Can only be remedied in the do-
mestic installation.

Содержание SMD8TC800E





































































Отзывы: