en
Troubleshooting
38
Fault
Cause and troubleshooting
E:25 lights up.
Wastewater pump is blocked.
▶
Clean the wastewater pump.
→
"Clean wastewater pump", Page 48
Cover of the wastewater pump is loose
▶
Secure the cover of the Wastewater pump
→
E:27 lights up.
Mains voltage is too low.
This is not a fault on the appliance.
1.
Contact an electrician.
2.
Have the mains voltage and electrical installation
checked by an electrician.
Another error code
appears on the dis-
play.
E:01 to E:30
A technical fault is present.
1.
Press .
2.
Unplug the appliance or switch off the fuse.
3.
Wait at least 2 minutes.
4.
Insert the mains plug of the appliance in a socket
or switch on the fuse.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press .
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact Customer Service →
the error code.
Fault
Cause and troubleshooting
Tableware is not dry.
No rinse aid used or dosage set too low.
1.
Add Rinse aid →
.
2.
Set the amount of rinse aid to be dispensed.
Programme or programme option has no drying
phase, or the drying phase is too brief.
▶
Select a programme with drying, e.g. intensive,
strong or ECO programme.
Some option buttons decrease the drying result, e.g
varioSpeed.
Water collects in recesses of the tableware or cutlery.