manualshive.com logo in svg

Bosch Singular 4000, Руководство по установке

Поделиться
Скачать
Bosch Singular 4000 Скачать руководство пользователя страница 46

4 6

 |

 

Installation Instructions

Singular Combi Boiler - BTC 439003301 B (2021/07)

 10.5.9     H8 mode

 

This is the mode for checking the current ambient temperature.

 

H8 and the current ambient temperature (example: 25) will be displayed 
repeatedly on the screen.

 

The unit is °F.

Figure 62

 10.5.10     H9 mode

 

This is the mode for checking the return temperature of the boiler.

 

H9 and the return temperature (example: 120) will be displayed 
repeatedly on the screen.

 

The unit is °F.

Figure 63

 10.5.11     HA mode

 

This is the mode for checking the hot water and heating modes.

 

HA and the heating mode or the hot water mode (example: FF or 00) will 
be displayed repeatedly on the screen.

 

FF is the current hot water mode, and 00 is the heating mode.

Figure 64

 10.5.12     HB mode

 

This is the mode for checking the current PCB version (example: 1.0).

 

HB and the PCB version will be displayed repeatedly on the screen.

Figure 65

Содержание Singular 4000





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды