Detergent
en-us
25
2.
Add rinse aid up to the max
mark.
max
3.
If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the
wash cycle.
4.
Close the lid of the dispenser
for rinse aid.
a
The lid clicks into position.
10.2 Setting the amount
of rinse aid
If there are streaks or water spots
on dishware, change the amount
of rinse aid.
1.
Press
.
2.
To open the basic settings,
press
for 3 seconds.
a
The display shows H:xx.
a
The display shows
.
3.
Press
repeatedly un-
til the display shows the value
set at the factory r:05.
4.
Press
repeatedly until the
right amount of rinse aid has
been set.
– A low setting adds less rinse
aid during the wash cycle
and reduces streaking on
dishware.
– A higher setting adds more
rinse aid during the wash cy-
cle, reduces water spots and
improves the drying result.
5.
To save the settings, press
for 3 seconds.
10.3 Switching the rinse
aid system off
If you choose not to use rinse aid,
you can turn the rinse aid system
off.
Tip: Rinse aid within a combina-
tion detergent has limited effec-
tiveness. You will generally get
better results using a separate
rinse aid.
1.
Press
.
2.
To open the basic settings,
press
for 3 seconds.
a
The display shows H:xx.
a
The display shows
.
3.
Press
repeatedly un-
til the display shows the value
set at the factory r:05.
4.
Press
repeatedly until the
display shows r:00.
5.
To save the settings, press
for 3 seconds.
a
The rinse aid system is
switched off and the rinse aid
refill indicator is deactivated.
Detergent
11 Detergent
Detergent
Find out which detergents are
suitable for your appliance.
11.1 The correct
detergents
Only use detergents that are
made for dishwashers, either ba-
sic or combination detergents.
For the best washing and drying
results, use a separate detergent,
then add Special salt and Rinse
separately.
Modern, powerful detergents
mainly use a low-alkaline formula-
tion with enzymes. Enzymes
break down starch and remove
protein. Oxygen-based bleaching
