en-us
Rinse aid system
24
3.
Note: Only use special salt
specified for dishwashers.
Do not use salt tablets.
Do not use table salt.
Add the special dishwasher salt
to the dispenser.
a
Funnel
Fill the dispenser completely
with the salt. The water in the
dispenser is displaced and
forced out.
4.
Place the lid back on the dis-
penser and turn to close.
9.4 Switching off the
water softening
system
If you do not need to use the wa-
ter softening system, e.g. you al-
ready have a whole house water
softening system, you can turn the
system off.
Note
To avoid damage to the
appliance, only switch off the
water softening system in the
following cases:
¡
The water hardness is max.
26 °E and you are using com-
bined detergents with salt re-
placement substances. Accord-
ing to manufacturers, combined
detergents with salt replace-
ment substances can generally
only be used up to a water
hardness of 26 °E without
adding special salt.
¡
The water hardness is 0 - 8 °E.
You can omit special salt.
1.
Press
.
2.
To open the basic settings,
press
for 3 seconds.
a
The display shows H:xx.
a
The display shows
.
3.
Press
repeatedly until the
display shows H:00.
4.
To save the settings, press
for 3 seconds.
a
The water softening system is
switched off and the salt refill
indicator is deactivated.
Rinse aid system
10 Rinse aid system
Rinse aid system
10.1 Rinse aid
For optimum drying results, use
rinse aid.
Only use rinse aid intended for
household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights
up, fill the dispenser with rinse
aid. Only use rinse aid intended
for household dishwashers.
1.
Press the catch on the lid of the
dispenser for rinse aid and
lift .
1
2
