background image

14

Your dishwasher requires no special care other than 

that described in the Care and Maintenance section of 

the Use and Care Manual. If you are having a problem 

with your dishwasher, before calling for service please 

refer to the Self Help section in the Use and Care 

Manual. If service is necessary, contact your dealer or 

installer or an authorized service center. 
Do not attempt to repair the appliance yourself. Any 

work performed by unauthorized personnel may void 

the warranty. If you are having a problem with your 

dishwasher and are not pleased with the service you 

have received, please take the following steps (in the 

order listed below) until the problem is corrected to 

your satisfaction:

1.  Contact your installer or the Authorized Service 

Contractor in your area.

2. 

E-mail  us.  See  your  Use  and  Care  Manual  for 

instructions.

3.  Write us at the address below:

 

BSH Home Appliances, Corp.

 

1901 Main Street, Suite 600

 

Irvine, CA 92614

4.  Call us at the Customer Service phone number :

1-800-944-2904

Please be sure to include (if you are writing), or have 

available (if you are calling), the following information:

• Model number

• Serial number

• Date of original purchase

• Date the problem originated

• Explanation of the problem

• Daytime phone number where you can be reached.

Please make a copy of your invoice and keep it with this 

manual. The customer must show proof of purchase to 

obtain warranty service.

Customer Service

14

Содержание SHEM78WH5N/30














Отзывы: