Bosch SGV2ITX18G Скачать руководство пользователя

Страница: 40 / 52

Troubleshooting

Fault

Cause

Troubleshooting

Appliance interior still wet
after wash cycle.

Not a fault. The condensa-
tion drying principle causes
water droplets in the tub –
they are indeed desirable
here. The moisture in the air
condenses on the inside
walls, runs off and is
pumped out.

No action required.

Remnants of food on table-
ware.

Tableware is placed too
close together or basket is
overfilled.

Arrange tableware with sufficient
space in between.
The spray jets must reach the sur-
faces of the tableware.

Avoid points of contact.

Spray arm rotation is
blocked.

▶

Arrange tableware so that it does
not obstruct spray arm rotation.

Spray arm nozzles are
blocked.

▶

Clean the "Spray arms"

→

Page 36

Filters are soiled.

▶

Clean the filters.

→

"Cleaning filters", Page 35

Filters are inserted incor-
rectly and/or not engaged.

Insert the filters properly.

→

"Filter system", Page 35

Engage the filters.

Washing programme selec-
ted too weak.

▶

Select a more intensive washing
programme.

→

"Programmes", Page 17

Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.

▶

Only remove large remnants of food
and do not prerinse tableware.

Tall narrow receptacles in
corner areas are not rinsed
adequately.

▶

Do not position tall narrow recept-
acles at too great an angle or in
corner areas.

Top baskets on right and left
are not set to same height.

▶

Set the top baskets on the left and
right to the same level.

Содержание SGV2ITX18G





















































Результаты поиска

Содержание SGV2ITX18G

Отзывы:

Похожие инструкции для SGV2ITX18G

Бренды по названию

Популярные бренды

Bosch SGV2ITX18G, Руководство пользователя

Результаты поиска

Содержание SGV2ITX18G

Отзывы:

Похожие инструкции для SGV2ITX18G

Бренды по названию

Популярные бренды