1 689 989 458
2020-01-01
|
Robert Bosch GmbH
6 | VDI III | User instructions
User instructions | VDI III | 7
en
2. User instructions
Before commissioning, connecting and operat-
ing this product, it is absolutely essential that
the operating instructions and, in particular,
the safety instructions are studied carefully. By
doing so, any uncertainties about handling this
product and any safety risks associated with it
can be eliminated in the interest of the user's
safety and in order to make sure to prevent any
damage to the product. Whenever this product
is handed over to another person, not only
the operating instructions but also the safety
instructions and information on its intended
use must be handed over as well.
2.1
User group
The product may be used by trained and inst-
ructed personnel only. Personnel merely sched-
uled to be trained, familiarized, instructed or to
take part in a general training course may only
work with the product under the supervision of
an experienced person.
All work on electrical devices must be carried
out by individuals with sufficient knowledge and
experience in the use of electrical and hydraulic
equipment.
2.2
FCC compliance (USA)
VDI III complies with the requirements of Sec-
tion 15 of the FCC rules. The following condi-
tions apply regarding operation:
R
VDI III must not cause any harmful
disruptions;
R
VDI III must withstand reception of
interference, including interference that can
cause unwanted operation.
VDI III has been tested and complies with the
limits for a Class A digital device as defined in
Part 15 of the FCC regulations. These limits
are designed to provide reasonable protection
against harmful interference when the equip-
ment is operated in a commercial environment.
VDI III may generate, use and emit energy at
radio frequencies that can disrupt radio com-
munication if it is installed improperly or used
in a manner inconsistent with the operating in-
structions. Operation of VDI III in a residential
area is likely to cause harmful interference, in
which case the user will be required to remove
the interference at his or her expense.
i
All changes or modifications to VDI III not ex-
pressly allowed by Robert Bosch GmbH may
void the permission to operate VDI III.
2.3
Open-source software (OSS)
For an overview of the open-source software,
see "C:\PROGRAM FILES (X86)\BOSCH\VTX-
VCI\VCI SOFTWARE (SAIC-VDI)\LEGAL".
2.4
Electromagnetic compatibility
(EMC)
VDI III satisfies the requirements of the EMC
directive 2014/30/EU.
i
VDI III
is a class/category
A
product in
accordance with
EN 61 326.
VDI III
may
cause high-frequency household interference
(radio interference) so that interference
suppression may be necessary. In such
cases, the operator may be required to take
appropriate action.
2.5
Range of application
VDI III is intended for indoor use only.
R
Do not expose VDI III to rain or moisture,
and prevent the formation of condensation.
R
Degree of contamination 2, keep area around
VDI III clean.
2.6
Wireless link (Bluetooth and
WLAN)
!
VDI III users are responsible for compliance
with the applicable directives and restric-
tions in the country concerned.