Assembly of the WS200 work station 47/92
DCA_DE_000151/10-2013, WS200,
Bosch Rexroth AG
Fig. 34:
Grid frame assembly at frame part 2
The following work steps describe the installation of the grid frame (1) into the
base frame (2):
•
Complete the partial assemblies according to fig. 30 to fig. 32:
•
Move the grid towards the frame (fig. 33). The screw heads (a) must enter the groove (b) of
the member profile. In this way, the grid is aligned to the base frame.
•
Lower the grid (1) evenly until it completely rests on the "Grid frame mounting kit".
•
Manually tighten the two star handle screws (d) (fig. 34).
To the assembly of 2 grids for 2 workplaces (see section 5.7), the same instructions apply
(fig. 30 to fig. 34).
Содержание Rexroth WS200
