Fig. 10-12: VESA support arm
Observe the minimum bending radius of the cables used.
Use only appropriate cable material (sufficient bending and torsional
strength).
To mount the housing device at a standardized VESA support arm, proceed as
follows:
1. Screw the support arm using four nuts M5 at the four M5 threaded bolts
on the rear side of the housing device.
2. Tighten the M5 nuts with a tightening torque of 2.8 Nm.
Damage to the mechanics caused by wrong
tightening torque.
NOTICE
Tighten the nuts with the correct tightening torque.
Bosch Rexroth AG
Mounting, demounting and electric installation
VEP 15.6 Multi Touch, VEP 21.6 Multi
Touch
34/53
DOK-SUPPL*-VEPXX.6MTHU-IT02-EN-P
Содержание Rexroth VEP 15.6 Multi Touch
Страница 6: ...Bosch Rexroth AG VEP 15 6 Multi Touch VEP 21 6 Multi Touch IV DOK SUPPL VEPXX 6MTHU IT02 EN P ...
Страница 57: ...VEP 15 6 Multi Touch VEP 21 6 Multi Touch Bosch Rexroth AG DOK SUPPL VEPXX 6MTHU IT02 EN P 51 53 ...
Страница 58: ...Bosch Rexroth AG VEP 15 6 Multi Touch VEP 21 6 Multi Touch 52 53 DOK SUPPL VEPXX 6MTHU IT02 EN P ...
Страница 59: ...Notes VEP 15 6 Multi Touch VEP 21 6 Multi Touch Bosch Rexroth AG ...