manualshive.com logo in svg

Bosch Rexroth Sytronix FcP 50 Series, Руководство по эксплуатации, Страница: 97 / 146

Поделиться
Скачать
Bosch Rexroth Sytronix FcP 50 Series Скачать руководство пользователя страница 97

13.4 

Troubleshooting MOT-FC

13.4.1 

General

Danger  of  injury  due  to  moving  elements!

Danger of injury due hot surfaces!

WARNING

●

Do not carry out any maintenance measures, while the machine is run‐

ning.

●

Switch off the control device and the machine and wait for the discharg‐

ing time of the electric systems to elapse before you start with trouble‐

shooting.

●

While carrying out maintenance work, secure the machine such that it

cannot restart or be used by unauthorized persons.

●

Do not work on hot surfaces.

The possible caused for malfunctions on Indra Dyn E motors can be limited

to the following areas:
●

motor fan function and temperature behavior

●

internal temperature sensor

●

mechanical damage of the motor

●

mechanical connection to the machine

In the following, some failure conditions with potential causes are exemplarily

explained. This list does not claim to be complete.

13.4.2 

Motor Fan Does Not Work Correct

Observe the notes regarding troubleshooting on the motor fan under

13.4.3 

Temperature Increased on Motor Housing

State

The housing temperature on the motor rises to unusual high values.

Possible cause

1.

Breakdown or malfunction within ventilation or cooling system

2.

Original machining cycle was changed

3.

Original motor parameters were changed

4.

Motor bearing worn or defective

Measures for

1.

Check fan function. Cleaning on demand. In the case of breakdown con‐

tact Bosch Rexroth Service.

2.

Check drive dimension for changed demands. In the case of overload

do not operate any longer. Danger of damage!

3.

Rebuild  original  parameterization.  Check  the  drive  dimension  in  the

case of changed demands

4.

Contact the machine manufacturer

DOK-SYTROX-MPES2******-IT01-EN-P 
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2 

Bosch Rexroth AG

95/143

Troubleshooting

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth Sytronix FcP 50 Series



















































































































































Отзывы:

Нет отзывов