RE 07009-MON/11.17 | Assembly Instructions for Hydraulic Power Units
Bosch Rexroth AG
15/20
6.2 Assembling the hydraulic power unit
Risk of injury due to tumbling, falling or uncontrolled movement of the
hydraulic power unit!
You should ensure that the product is sufficiently stable.
f
Observe the information on handling the product in Chapter 5 “Transport
and storage”.
f
Any packing/transit materials, straps, props or fixtures should only be removed
if stability has been ensured by other means.
f
Place the hydraulic power unit
on a suitable foundation. Observe the
specifications of the overall weight.
To assemble the hydraulic power unit you should proceed as follows:
f
Position the hydraulic power unit or the assembly as specified in the product-
specific documentation.
f
Ensure that the footprint contact associated with mounting is consistent.
f
Level the hydraulic power unit so that its longitudinal and transverse axes are
horizontal.
f
Prevent possible bouncing by suitable means (e.g. height adjustment of the
feet, insertion of shims, packers).
f
Securely fix the product at the mounting positions specified in the product-
specific documentation.
6.3 Installing the hydraulic system
Risk of injury when assembling under pressure!
If you fail to depressurize the product before starting the installation, you may
suffer injury and also damage the unit or system components.
f
Always depressurize the relevant part of the system before assembling the
hydraulic power unit.
Damaging the hydraulic power unit!
When assembling hydraulic lines and hoses under mechanical stress, they are
exposed to additional mechanical forces during operation, which reduces the
service life of the hydraulic power unit and the complete machine or system.
f
Assemble the piping and hose assemblies without mechanical stress.
WARNING!
CAUTION!
CAUTION!
