Bosch REXROTH mMS 4.0, Руководство по эксплуатации

Страница: 41 / 68

Training system mMS 4.0 | R901429162/04.16 Bosch Rexroth AG 41/68
Transport and storage
8 Transport and storage
8.1 Delivery and unpacking
Screwdriver, knife, pry bar.

Transport the wooden crate n upright to the place of unpacking using a fork lift
truck or pallet truck.

Open the wire ties on the wooden crate using a knife.

Using a screwdriver, undo the front of the wooden crates and put them away.

Open up the plastic packaging using a knife.

Carefully lift each station of the mMS 4.0 training system down from the pallet
and remove from the crate.

Carefully remove the cable ties and wire ties and dispose of them
appropriately.

Dispose of the pallet and wooden box properly or store appropriately for
subsequent use.
Any transport damage and defects must be noted right away and reported
in a written damage report.
Required tool:
CAUTION
Risk that the training system may fall over.
Risk of injury when lifting and transporting the machine!

When lifting and transporting the machine, always carefully do so with at least
two persons in order to prevent it from dropping.

Lift the mMS 4.0 training system by hand or with a floor conveyor.
Procedure