manualshive.com logo in svg

Bosch rexroth M1, Инструкция по эксплуатации

Поделиться
Скачать
Bosch rexroth M1 Скачать руководство пользователя страница 26

26

/54

 

Control blocks for mobile applications

 | Installation

Bosch Rexroth AG, RE 64025-B/2021-08-12

7�3  Installation conditions

The installation location and installation position of the check valve essentially 
determine how to proceed during the installation and commissioning (such as 
when air bleeding the control block).

 

▶ Fasten the control block so that the expected forces and torques can be 

transferred without any danger. The machine manufacturer is responsible for 
dimensioning the mounting elements and threaded connections.

 

▶ Make sure that the control block is air bled and filled with hydraulic fluid at 

commissioning and during operation. Do not hydraulically empty the control 
block during a standstill period.

 

▶ Make sure that the working environment at the installation site is completely 

free of dust and foreign substances. The control block must be installed in 
a clean condition. Contamination of the hydraulic fluid can have a seriously 
negative effect on the function and service life of the control block.

7�4  Installation position

Unless otherwise stated in the technical documentation, the installation position 
of the control block is arbitrary.

7�5  Installing the control block

7�5�1  Required tools

Installation can be performed with standard tools. No special tools are necessary. 
Also observe the manuals provided by the manufacturers of the other hydraulic 
components when selecting the required tools.

7�5�2  Preparation
1� 

Check the parameters on the name plate to see if the control block is correct.

2� 

Compare the material number and designation (type code) with the parameters 
in the order confirmation.

If the material number for the control block does not correspond to the one in 
the order confirmation, contact Bosch Rexroth Service for clarification, 
see Chapter 10.5 "Spare parts" on page 42.

3� 

Before installation, empty the control block to prevent mixing with the 
hydraulic fluid used in the machine.

7�5�3  Dimensions

The offer drawing contains the dimensions for all the ports on the control block. 

7�5�4  Fastening the control block

The control block has mounting holes or threads that are shown in the offer 
drawing and data sheet. The bore pattern required for assembly (dimensions 
and tolerances) with mounting holes at the machine can be found in the offer 
drawing or the data sheet. The tightening torques are to be selected according 
to the standard values for the respective bore sizes and bolt property classes. 

Содержание rexroth M1























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды