1:
Diagnostic bar in the header
2:
List of active diagnostics messages
3:
Text describing the cause of the message selected under 2
4:
Text describing a remedy for the message selected under 2
Fig. 7-11:
Diagnostics message display on the HMI
7.4.3
Message classification
If a specific machine status occurs, there should also be a specific reaction.
The MTX micro features an option of classifying the MZA messages. The
number of the message (1–2048) defines the reaction of the CNC to this
message.
Bosch Rexroth AG
DOK-MTXMIC-EASY*******-CO06-EN-P
82/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
PLC commissioning
