Bosch Rexroth IndraControl XFE 01.1 Series, Руководство по эксплуатации

Страница: 35 / 44

15 Ordering information
15.1 Type code
Type short description
1 2 3 4 5 6 7 8 9
1
0 1 2 3 4 5
Example: X F E 0 1 . 1 - F B - 1 0
01
Device type 1
I/O box................... = X
02
Device type 2
Function extension... = F
03
Extension type
Ext. board (detachable) = B
Ext. card (plug-in) ........ = C
Ext. module (modular) . = E
04
Type of construction
Type 1 - PCIe ................. = 01
Type 2 – S20 .................. = 02
05
Design
HW design ................................. = 1
06
Function type
Communication interface .................. = CX
Field bus........................................... = FB
I/O connection .................................. = IO
Safety ............................................... = SY
1)
Memory, volatile................................ = M0
07
Function (corresponding to the functiontype)
Field bus
No field bus ................................................ = 00
Sercos master .............................................. = 01
Sercos slave ................................................ = 02
RT-Ethernet configurable master ................. = 03
RT-Ethernet configurable slave ................... = 04
Profibus master
...................................... = 10
Profibus slave ........................................ = 11
CAN Master (netX) ...................................... = 12
CAN Slave (netX) ........................................ = 13
CAN master 2 x (passive)............................. = 20
CAN slave 2 x (passive) ............................... = 21
CAN master 4 x (passive)............................. = 22
CAN slave 4 x (passive)............................... = 23
Safety
Safe Logic to SIL3 ....................................... = 01
1)
Note:
1) Function type “SY” only available with function Safety “01”
Fig. 15-1: Type code
Extension Modules Profibus, RT-
Ethernet, Sercos, CAN
Bosch Rexroth AG
Ordering information
DOK-CONTRL-XFE**EXTMOD-IT04-EN-P
29/37