Bosch rexroth IndraControl VEP 30.6, Руководство по эксплуатации

Страница: 28 / 56

10.2 Installing the embedded terminals VEP 30.6, 40.6 and 50.6
10.2.1 Mounting cut-out
Damage to the front panel or to the touch
screen and the IP degree of protection is not
maintained due to incorrect installation.
NOTICE
●
Mount the devices without mechanical stress
●
Provide a sufficiently sized front cut-out
●
Provide an even mounting surface
●
Ensure that no objects are squeezed
To create a mounting cut-out and to install the embedded terminal, proceed as
follows:
1. Create a mounting cut-out with the corresponding number of holes, diame-
ter of 5 mm acc. to the illustrations "Mounting dimensions" on the follow-
ing pages.
2. Insert the embedded terminal from the front into the cut-out and insert the
mounting bolts M4 into the drilled holes.
3. Fasten the embedded terminal by screwing the nuts at the rear side of the
mounting bolts.
1
1
①
Mounting bolt
Fig. 10-3: Rear view: Position of the mounting bolts (exemplary illustration)
22/49
Mounting, demounting and electric installation IndraControl VEP 30.6, VEP 40.6,
VEP 50.6 Embedded Terminals
Bosch Rexroth AG R911403058_Edition 01