Bosch Rexroth IndraControl VCP 08.2, Руководство по планированию проекта

Страница: 43 / 78

R911310379 / 02 | Rexroth IndraControl VCP 08 Electric Drives and Controls | Bosch Rexroth AG 7 -5
Interfaces
1. Female Connector X5 (Ethernet)
2. Female Connector X6 (RS422/RS485/RS232)
3. Female Connectors X9, X10 (USB Host - Type A)
4. Termination Switch (X6-SER1 RS485)
5. Threaded Bolt for Protective Grounding
6. Connector X1 (Supply Voltage)
7.2.1 RS485 (X6-SER1)
The interface is suitable for point-to-point and for multi-point connec-
tions.
The wires belonging together are marked with „A“ and „B“. Some
descriptions refer to the pins with „+“ and „-“ , where A = + and B = -.
7.2.1.1 Pin Assignment
Fig. 7-6: 25 pin D-SUB female connector strip
Connector in the small operator terminal: 25-pin D-SUB female con-
nector strip
Signal Logic 1 U
A
- U
B
<= -0.3 V i.e. (U
A
< U
B
)
Signal Logic 0 U
A
- U
B
>= +0.3 V i.e. (U
A
> U
B
)
Pin Designation Function
8 T(A) Transmitted data (+)
9 T(B) Transmitted data (-)
11 SGND Signal Ground
22 R(A) Received data (+)
23 R(B) Received data (-)
Fig. 7-7: Pin assignment RS485
The D-SUB connector strips must be shielded sufficiently. See chapter
„Shielding D-SUB Connectors“ on page 7-15.