Bosch Rexroth IndraControl VAU 01.1U, Руководство по планированию проекта

Страница: 49 / 66

8 Maintenance, Storage and Transport
8.1 Task
Target This chapter contains notes and information on the maintenance of the VAU
01.1U. This chapter describes e.g. how to replace the battery. Furthermore, it
contains information on storage and transportation of the VAU 01.1U.
Requirement For replacing the battery, the following have to be present:
●
A T10 Torx screwdriver
● A T25 Torx screwdriver
● A battery permitted by Bosch Rexroth (e.g. "AKKU24V/2,5Ah", parts
number: 1070923287)
8.2 General Information
The VAU 01.1U is maintenance-free. However, a few parts are subject to
wear and have to be replaced after a certain number of operating hours.
Only qualified persons may perform mainte‐
nance work in the device!
CAUTION
If hardware or software components have to be replaced, please contact the
Bosch Rexroth Service (see chapter 11 "Service and Support" on page 57 )
or ensure that only qualified persons replace the respective components.
Maintenance Include the following measures in your maintenance schedule:
●
At least once a year, check all plug and terminal connections of the
components regarding proper tightness and possible damage. Verify
that lines and cables are not broken or squeezed. Replace damaged
parts immediately.
The used batteries are recyclable and can be returned to Bosch
Rexroth after replacement. They must not be disposed in the
standard household refuse!
Batteries can cause fire, explosions or chemi‐
cal burn.
WARNING
Do not load, remove, destroy, burn or heat batteries over 100 °C. Dispose old
batteries immediately and properly. Keep away from children!
DOK-SUPPL*-VAU*01.1U**-PR03-EN-P
Rexroth IndraControl VAU 01.1U UPS with USB interface Bosch Rexroth AG 47/63
Maintenance, Storage and Transport