Bosch Rexroth IndraControl VAU 01.1U, Руководство по планированию проекта

Страница: 41 / 66

7 Interfaces and Wiring
7.1 Task
Target This chapter contains an overview of the interfaces. Additionally, this chapter
informs how to wire the power connection and which cable lines and cross-
sections have to be taken into consideration. It also informs on the USB con‐
nection XUSBIn.
Requirement ● The VAU 01.1U has to be already mounted.
● Tools for electrical installation are present.
● Ensure that fuse F1 is inserted (see also chapter 6.3 "Fuse F1" on page
31 ).
● Set S1 rotary switch "before" using the VAU 01.1U (see also chapter
6.4 "Rotary Switch S1" on page 32 ).
7.2 Connector Panel
7.2.1 General Information
The terminals for the voltage connection, the voltage output and the USB in‐
terface as well as the display and operating components are arranged on the
connector panel.
1
2
3
4
5
6
7
① Voltage connection, X1S1
② Voltage output, X1S2
③ USB interface, XUSB In
④ Fuse, F1
⑤ Rotary switch, S1
⑥ Display components
⑦ Functional earth ground
Fig.7-1: Connector panel of the VAU 01.1U with USB interface
DOK-SUPPL*-VAU*01.1U**-PR03-EN-P
Rexroth IndraControl VAU 01.1U UPS with USB interface Bosch Rexroth AG 39/63
Interfaces and Wiring