Bosch rexroth IndraControl VAC 08.1, Руководство по эксплуатации

Страница: 32 / 40

LED Name Description Action
Video2 LED flashing
green
Image data is sent to the operator
display 2.
-
LED off The PC does not sent any image data
to the CDI+ splitter
-
Link2 LED green Communication active und operator
panel selected.
-
LED red Operator panel not selected and no
communication possible with the op-
erator panel
-
LED green
and red
Operator panel not selected, but the
communication is possible with the
operator panel
-
LED off No communication possible with the
operator display, even though it is ac-
tive (selected via SEL or MOD)
-
Tab. 12-3: Description of the LED states
13 Error causes and troubleshooting
Device states are indicated at the front panel via LED.
The arrangement of the LED on the front panel is shown in
fig. 9-1 "Connector
panel of the CDI+ splitter" on page 12 .
Errors Troubleshooting
The LED V
IN
is not on at the CDI+ splitter
●
Connector not connected to X1S1
●
External voltage supply does not supply voltage
The active operator display cannot be
operated
●
Check whether all cables are plugged in (control cabinet
PC, operator display and CDI+ splitter)
●
Check for the plug X1S1 at the input "SEL"
●
Check for the plug X1S1 at the input "MOD"
No image is displayed at the active oper-
ator display
●
Check whether all cables are plugged in (control cabinet
PC, operator display and CDI+ splitter)
●
Check for the plug X1S1 at the input "SEL"
●
Check for the plug X1S1 at the input "MOD"
Tab. 13-1: Error causes and troubleshooting
Repairs at the device by the customer are not permitted. Exceptions
are maintenance works listed in the chapter "Maintenance".
For further information in the event of repair, please contact the
Bosch Rexroth Service.
26/33
Error causes and troubleshooting IndraControl VAC 08.1 CDI+ Splitter
Bosch Rexroth AG R911400465_Edition 01