Bosch Rexroth GTE Series Скачать руководство пользователя | Manualshive

Страница: 64 / 88

background image

●

service information

9.2

Transport and Storage

Damage or injuries and invalidation of the war‐

ranty due to improper handling!

CAUTION

⇒ Avoid mechanical stressing, throwing, tipping or dropping of the products.
⇒ Use suitable lifting equipment only.
⇒ Never lift up the motor on the optional fan housing.
⇒ Use suitable protective equipment and protective clothing during transport;

wear safety shoes.
⇒ Protect the products from dampness and corrosion.

Also observe the notes regarding storage and transport on the packages

Gearboxes

The gearboxes are typically supplied in recyclable cardboard boxes with carton

for shaped elements.
It is recommended to store the gearboxes in their original packaging in a hori‐

zontal position until the are ready for use. The permissible temperature range

for short-term storage or transport is –20°C up to +80°C.
For long-term storage, it is recommended to store the gearboxes in a dry en‐

vironment with temperatures from 0°C to +30°C. The gearboxes can be stored

over a period of maximum 2 years under these conditions.
Avoid direct insolation, UV light and ozone because it leads to deterioration of

the sealants.
We recommend using a FIFO system - ”First-in, first-out”.

Remove all the anticorrosive on the gearboxes before mounting

them.

The GTE gearboxes are filled-for-life with lubrication and are ready for use. The

input and output are treated with anticorrosive coating.

Do not proceed cleaning via air pressure!

NOTICE

The danger consists that overpressure within the gearbox can occur which

negatively influences the function and lifetime of the gearbox.

Motor-Gearbox-Combination

The following conditions must be kept during transport and handling:
●

Use the appropriate means for transport. Take the weight of the compo‐

nents into consideration (weights are specified in the appropriate ”Tech‐

nical Data” chapters of the various motors and gearboxes and/or on the

type label of the motor).

●

Transport the motor-gearbox combination only in the horizontal position.

●

To lift the motor-gearbox combinations use a crane and lifting sling belts

●

Avoid damage to the motor flange and drive shaft.

●

Avoid impacts on the gearbox drive shaft.

●

Remove the protective cover on the gearbox output shaft just before

mounting.

Bosch Rexroth AG

DOK-GEAR**-GTE********-PR06-EN-P

Rexroth GTE Planetary Gearboxes

62/85

Handling, Transport and Storage

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

«
...
62
63
64
65
66
...
»

Содержание Rexroth GTE Series

























































































Отзывы:

Нет отзывов

Похожие инструкции для Rexroth GTE Series

Бренд: B&K Страницы: 8

Бренд: Garmin Страницы: 2

Бренд: Nitecore Страницы: 4

Martin ERA 800 Performance

Бренд: Harman Страницы: 32

Martin ERA 600 Performance

Бренд: Harman Страницы: 32

Бренд: Hardt Страницы: 22

Бренд: Sabre Страницы: 2

Бренд: Landi Renzo Страницы: 16

Бренд: IBM Страницы: 163

Бренд: IDEAL Networks Страницы: 60

Бренд: IceCure Страницы: 104

Бренд: Kamikaze Страницы: 112

Бренд: KAM Страницы: 2

Бренд: Kellfri Страницы: 12

Бренд: Pari Страницы: 11

Бренд: Pari Страницы: 2

Бренд: Haas Страницы: 5

Бренд: Vapotherm Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды