EN
GLISH
R320103174/2018-08 | Function modules
Bosch Rexroth AG
5/30
Safety instructions are structured as follows:
SIGNAL WORD
Type of hazard!
Consequences if ignored.
f
Hazard prevention measure.
• Warning sign: Draws attention to the hazard
• Signal word: Indicates the severity of the hazard
• Type of hazard: Indicates the type or source of the hazard
• Consequences: Describes the consequences that may occur if the hazard avoidance precautions are ignored
• Hazard prevention measure: Indicates how to avoid the hazard
The safety instructions cover the following hazard levels. The hazard level describes the risks involved if the safety
instruction is not complied with.
Tabelle 2:
Hazard levels as per ANSI Z535
Warning sign, signal word Meaning
DANGER
Indicates an imminently hazardous situation which will result in death or serious injury if not
avoided.
WARNING
Indicates a potentially hazardous situation which could result in death or serious injury if not
avoided.
CAUTION
Indicates a potentially hazardous situation which may result in minor or moderate injury if not
avoided.
NOTICE
Damage to property: Risk of damaging the product or the surrounding environment.
1.3.2
Symbols
The following symbols indicate notes that are not safety-critical but make the documentation easier to understand.
Tabelle 3:
Meaning of the symbols
Symbol
Meaning
If this information is not observed, the product will not be optimally used or operated.
X
Single, independent work step
1.
2.
3.
Numbered work steps
The numbers indicate the sequence of the work steps.
!
7
See section 7
!
Fig. 7.1
See Figure 7.1
Screw with strength class...
u
Tightening torque
m
Friction factor for screws
