5-6
Instructions for Use
Rexroth Diax 04 HDD and HDS
DOK-DIAX04-HDD+HDS*UL*-IB01-EN-P
Connection of Control Interfaces and Terminals
See project planning manual for more details.
X1, Connector for integrated bus connections from the neighboring unit
Technical data of connector
The control electronics of the drive controller receive their power via
connector X1. The connection starts at the supply unit and runs to the
drive controller with the help of the flat-ribbon cable integrated into the
units. Maximum length here also equals one meter (if extensions are
used)!
Ap5336f1.FH7
Fig. 5-6: Connector X1
Type
No. of pins
Design
ribbon cable connector
30
connector at the unit
ribbon cable bushing
30
bushing at the ribbon
cable
Fig. 5-7: Design
Note:
This is an internal connection between the supply unit and the
drive controller.
X5, DC bus and motor connections
Technical data of connector
Ap5335f1.FH7
A1
A2
A3
Fig. 5-8:
Connector X5 HDD02, HDS02
Ap5337f1.FH7
A1 A2
A3
Fig. 5-9:
Connector X5 HDS03, HDS04
Connector X1, bus
connection
Illustration:
Design
Illustration:
