manualshive.com logo in svg

Bosch Rexroth DBET, Руководство по эксплуатации

Поделиться
Скачать
Bosch Rexroth DBET Скачать руководство пользователя страница 18

18/48 

Scope of delivery

Bosch Rexroth AG

, DBET.../...XE, RE29162-XE-B/10.20

4  Scope of delivery

The scope of delivery includes:

 

• Proportional pressure relief valve, direct operated 

Type DBET.../...XE

 

• Product documentation (operating instructions with declaration of conformity and 

data sheet)

 

▶

Check the scope of delivery for completeness.

 

▶

Check the scope of delivery for possible transport damage, see chapter 6 
"Transport and storage".

In case of complaints, please contact Bosch Rexroth AG, see chapter 16.1 
"List of addresses".

Accessories such as valve subplates and valve mounting screws are not included 
in the scope of delivery and must be ordered separately. See chapter 7.6 
"Required accessories".

5  Product information

For information on the performance and product description please refer to 

"Data sheet 29162-XE"

 of your valve.

Содержание Rexroth DBET

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды