BMW RCK3 VCI User Manual
Version 1.0.2 Page 7
© Bosch 2015
Power Source
Power is applied by the PC’s USB port after a USB connection is made between the PC and
the RCK3 VCI.
LEDs
Four Light Emitting Diodes (LEDs) are located on the front of the RCK3 VCI.
During the VCI start-up phase the Motorcycle and Host LED’s are illuminated one time from
left to right. When the start-up phase is finished the green Power LED is permanently on.
In Active state the Motorcycle LED and the HOST LED are flickering.
The red Error LED is turned on, when a problem occurred.
Ready
Tool is ready to use.
Active
The Motorcycle and host application
are connected and communicating
Error
A problem occurred.
Identifying your BMW RCK3 VCI
The RCK3 VCI assembly label is located on the back of the unit. The assembly identification
number, located below the bar code, has two parts: a manufacturing code for traceability and a
unique serial number. For example, the number below the bar code may be: 1404-00401475.
1404 is the manufacturing code and 00401475 is the unit serial number.
Motorcycle LED
Host LED
ERROR LED
Power LED