
BMW RCK3 VCI User Manual
Version 1.0.2 Page 3
© Bosch 2015
INTRODUCTION
This User’s Guide will provide an overview of the BMW RCK3 VCI, cables, firmware and VCI
Manager software (Integrated with the RCK3 PC based software). Everything contained in
this manual is based on the latest product information available at the time of publication. The
right is reserved to make changes at any time without notice.
No part of this publication may be reproduced, stored in any retrieval system, or transmitted in
any form by any means, including but not limited to electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of
BOSCH
. This includes all text,
tables, illustrations, and charts.
Requests for permission should be sent to:
Robert-Bosch-Straße 10
Plochingen, Germany
© 2015
BOSCH
All rights reserved.
Foreword
This User’s Guide is designed to provide complete and accurate technical information based
on the latest information available at the time of publication. However, the right is reserved to
make changes at any time without notice.
The
BMW RCK3 VCI, cables and firmware
provide the following capabilities:
• Communication with the BMW Motorcycle ECU’s and RCK3 application installed on the PC.
• Transfer of calibration files from the PC to the target ECU on the Motorcycle
• Connection status and calibration feedback to the RCK3 application running on the PC.