manualshive.com logo in svg

Bosch Radionics D8024, Руководство оператора

Поделиться
Скачать
Bosch Radionics D8024 Скачать руководство пользователя страница 19

D8024

D8024 Operator’s Guide

Copyright © 2001 Radionics

Page 19

35394D

4.4.4

View Functions

Select 7)  View from the Main Menu to enter the View Menu. This menu displays information about the selected option
on the alphanumeric display. After viewing an option, press the [No] key to return to the View Menu. Press the [No] key
again to return to the Main Menu.

VIEW:  1) Device  2) Log  3) Faults

4) Outputs  5) Disablements  6) Sys Events

Figure 19: View Menu

4.4.4.1

View Devices

This option allows the operator to view the current state and text of any device on a circuit.

Select 1) Devices from the View Menu.

The display will prompt for the loop (circuit) number. Key in the circuit number and press [Enter].

The display will then prompt for the address. Key in the address and press  [Enter].

4.4.4.2

View Event Log

This option allows the operator to view the Event Log.

Select 2) Log from the View Menu and press [Enter].

The display prompts a beginning entry number. The default is the latest entry. Press [Yes] to accept the prompt.

Press [No] to select another entry. Use the [<]  [>] keys to scroll through the log.

Exit this menu by pressing the [No] key.

4.4.4.3

View Faults

This option displays the panel fault status. This is the same display as the normal alphanumeric display without the logo.
The operator may scroll through all the faults using the [<]  [>] keys.

Exit this menu by pressing the [No] key.

4.4.4.4

View Outputs

This option displays information on the outputs.

Using the Alarm Silence Key forces all NAC devices to an OFF condition.

4.4.4.5

View Disablements

This option displays information on disabled devices. Select 1) Zones to view disabled devices by zone. Select 2) Inputs
to view disabled input devices.

4.4.4.6

View System Events

This option displays information on system events. Use the [<]  [>] keys to scroll through the events.

Control Level 2

National Security Systems (800)457-1999 

http://www.nationalsecuritysystems.com 

Содержание Radionics D8024

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды