Bosch R911172765, Руководство по эксплуатации

Страница: 20 / 36

The SafeLogic compact Sercos Gateway has to be directly connected to the right
of the main module SLC-3-CPU0 or SLC-3-CPU1. The SafeLogic compact Sercos
Gateway is located in a 22.5 mm wide modular system for 35 mm DIN rails
according to EN 60715. The modules are connected to each other via a plug
connection integrated in the housing. Mount the modules in accordance with
EN 50274. Ensure suitable ESD protective measures while mounting. Otherwise,
the SafeLogic compact components can be damaged. Take suitable measures to
ensure that foreign matter does not enter the connector openings, in particular
the openings of the system plug.
Snap the SafeLogic compact Sercos Gateway onto the DIN rail:
1. Hang the device onto the DIN rail
①
.
2. Ensure that the earthing spring contact is positioned correctly
②
. The
earthing spring contact of the SafeLogic compact Sercos Gateway must
contact the DIN rail securely to allow electrical conductivity.
3. Latch the SafeLogic compact Sercos Gateway onto the DIN rail by pressing
it lightly in the direction of the arrow
③
.
Fig. 10-2: Snap the SafeLogic compact Sercos Gateway onto the DIN rail
4. If there are several modules, slide the modules together individually in the
direction of the arrow until the side plug connection latches in.
5. Install end clips on the left and right.
Bosch Rexroth AG
Mounting, demounting and electric installation Sercos Gateway
16/31
DOK-CONTRL-SLC*GW*GS3S-IT03-EN-P