Bosch PVQ F2 Series, Руководство пользователя

Страница: 20 / 32

en
Energy consumption display
20
18 Energy consumption display
This function indicates the total amount of energy con-
sumed between switching the hob on and switching it
off again.
Once switched off, the energy consumption is dis-
played in kilowatt hours, e.g. 1.08 kWh, for
10 seconds.
The accuracy of the display depends on various factors
such as the voltage quality of the power supply.
The display can be activated in the basic settings.
→
Page 18
19 Cookware test
You can use this function to check the speed and qual-
ity of the cooking process depending on the cookware.
The result is a reference value and depends on the
properties of the cookware and the cooking zone being
used.
You can find more information about this function un-
der
→
"Basic settings", Page 18 and on the type, size and
positioning of the cookware under
→
"Induction cooking", Page 7 .
19.1 Procedure for checking the cookware
1.
Fill the cookware with approximately 200 ml water
at room temperature and place it in the middle of
the cooking zone that most closely matches the dia-
meter of the base of the cookware.
2.
Call up the basic settings and select ⁠ ⁠ ⁠.
3. Touch the control panel. The display flashes in
the cooking zones.
a The function has been activated.
a
After 10 seconds, the result appears in the cooking
zone displays.
Note:
If the diameter of the cooking zone that is used
is much smaller than the diameter of the cookware,
only the middle of the cookware can be expected to
heat up. This may result in the cooking results not be-
ing as good as expected or being less than satisfact-
ory.
19.2 Checking the result
In the following table, you can check the result for the
quality and speed of the cooking process:
Result
The cookware is not suitable for the
cooking zone and therefore does not
heat up.
1
The cookware is taking longer to heat
up than expected and cooking is not
progressing as well as it ought to.
1
The cookware is heating up correctly
and cooking is progressing well.
1
If a smaller cooking zone is available, test the cook-
ware on this cooking zone.
To activate this function, touch the settings range.