6
| English
1 609 92A 0HH | (18.11.13)
Bosch Power Tools
English
Safety Notes
General Safety Rules
Read all warning notes and instructions en-
closed with the saw stand and the power
tool to be mounted.
Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Safety Warnings for Saw Stands
Pull the plug from the mains receptacle and/or remove
the battery from the power tool before making adjust-
ments on the tool or changing tool accessories.
Unin-
tentional switching on of the power tool is the cause of
many accidents.
Assemble the saw stand in the proper manner before
mounting the power tool.
Proper assembly is important
to prevent the risk of a collapse of the saw stand.
Attach the power tool securely to the saw stand before
using it.
Slipping off of the power tool on the saw stand
can lead to loss of control.
Place the saw stand on a firm, level and horizontal sur-
face.
If the saw stand can slip off or wobbles, the power
tool or the workpiece cannot be uniformly and securely
guided.
Do not overload the saw stand and do not use it as a lad-
der or scaffolding.
Overloading or standing on the saw
stand can lead to the upward shifting of the centre of grav-
ity of the stand and its tipping over.
When working or transporting, take care that all bolts
and connecting elements are firmly tightened. The at-
tachment sets for the power tool must always be firmly
locked.
Loose connections can lead to instability and inex-
act sawing.
Mount and dismount the power tool only when it is in
the transport position (for instructions on the trans-
port position, also see the operating instructions of the
respective power tool).
Otherwise, the power tool can
have such an unfavourable centre of gravity that it cannot
be held securely.
When the power tool is mounted to the attachment set,
operate it exclusively on the saw stand.
Without the saw
stand, the attachment set with the power tool does not
stand securely and can tip over.
Ensure that long and heavy workpieces do not affect
the equilibrium of the saw stand.
Long and/or heavy
workpieces must be supported at the free end.
Keep your fingers clear of the hinge points while push-
ing the saw stand together or pulling it apart.
Danger of
fingers being crushed or contused.
Symbols
The following symbols can be important for the operation of
your saw stand. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the saw stand better and more secure.
Product Description and Specifica-
tions
Intended Use
Together with the power tool, the saw stand is intended for
the cutting to length of boards and profiles.
Product Features
The numbering of the product features refers to the illustra-
tion of the saw stand on the graphics pages.
1
Locking knob of the workpiece support
3
2
Table extension
3
Workpiece support
4
Locking knob of the table extension
2
5
Attachment set
6
Locking pin
7
Height-adjustable leg
8
Locking knob of the attachment set
5
9
Carriage bolt
10
Nut locking device
11
Washer
12
Spring washer
13
Nut
14
Lock nut
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Symbol
Meaning
The maximum carrying capacity (power
tool + workpiece) of the saw stand is
115 kg.
OBJ_BUCH-2132-001.book Page 6 Monday, November 18, 2013 2:34 PM
