English |
35
Bosch Power Tools
1 609 92A 0V2 | (19.8.14)
Left Rotation:
For loosening or unscrewing screws, push the rotational di-
rection switch
8
right to the stop.
The indicator for left rotation
6
lights up when the On/Off switch
10
is actuated and the motor is running.
Switching On and Off
To save energy, only switch the power tool on when using it.
Note:
The power tool can only be switched on when the sliding switch
7
has
been pushed to the front position.
To
start
the machine, press the On/Off switch
10
and keep it pressed.
The power light
12
lights up when the On/Off switch
10
is slightly or com-
pletely pressed, and allows the work area to be illuminated when lighting
conditions are insufficient.
To
switch off
the machine, release the On/Off switch
10
.
The spindle is locked when the On/Off switch
10
is not pressed.
When the spindle is locked, do not press the On/Off switch 10 for
more than 15 seconds. Otherwise the power tool can be damaged.
Battery Charge-control Indication
The battery charge-control indicator
5
indicates the charge condition of the
battery when the power tool is switched on.
Temperature Dependent Overload Protection
When using as intended for, the power tool cannot be subject to overload.
When the load is too high or the allowable battery temperature of 65 °C is ex-
ceeded, the electronic control switches off the power tool until the tempera-
ture is in the optimum temperature range again.
LED
Capacity
Continuous lighting, green
≥ 30%
Continuous lighting, red
< 30%
OBJ_DOKU-28872-003.fm Page 35 Tuesday, August 19, 2014 5:11 PM
