2 609 001 148 • 14.12.06
28
| English
Disconnect the battery charger from the mains supply when not
using it for longer periods.
f
Protect the battery charger against moisture!
Observe the notes for disposal.
Changing the Tool (see figure B)
f
Do not use double-sided screwdriver blades that are
longer than 25 mm.
Insert the screwdriver bit
1
directly into the tool holder
2
.
Operation
Starting Operation
Reversing the Rotational Direction
The rotational direction switch
9
is used to reverse the rotational
direction of the machine. However, this is not possible with the
On/Off switch
8
actuated.
Right rotation:
For driving in screws, push the rotational direc-
tion switch
9
left to the stop.
The indicator for right rotation
3
lights up when the On/Off
switch
8
is actuated and the motor is running.
Left Rotation:
For loosening or unscrewing screws, push the
rotational direction switch
9
right to the stop.
The indicator for left rotation
5
lights up when the On/Off
switch
8
is actuated and the motor is running.
Setting the Torque
With the thumbwheel for torque preselection
6
, the required
torque can be preselected in 6 steps. The inserted tool is stopped
as soon as the set torque is reached.
OBJ_DOKU-1495-002.fm Page 28 Thursday, December 14, 2006 2:56 PM
