Bosch PSM 18 LI, Оригинальное руководство пользователя

Страница: 20 / 130

20 | English
2 609 004 215 | (31.5.10) Bosch Power Tools
The battery is equipped with a NTC temperature
control which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A
long battery service life is achieved in this man-
ner.
Observe the notes for disposal.
Dust/Chip Extraction
f
Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the work-
ing place.
– It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Integrated Dust Extraction with Dust Box
(see figures C1 – C4)
Attach the dust box 3 onto the extraction outlet
10 until it latches.
To empty the dust box 3 , pull off the dust box
downward.
Before opening the dust box
3 , it is recommend-
ed to loosen the dust from the filter element by
gently striking it against a firm support (as
shown in the figure).
Hold the dust box
3 firmly, fold the filter ele-
ment 11 upward and empty the dust box. Clean
the thin plates of the filter element 11 with a
soft brush.
External Dust Extraction (see figure D)
Slide the extraction adapter 12 onto the outlet
piece 10 . The extraction adapter 12 accepts a
vacuum hose with a diameter of 19 mm.
An overview for connecting to different vacuum
cleaners can be found at the end of these oper-
ating instructions.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially det-
rimental to health or carcinogenic, use a special
vacuum cleaner.
Replacing the Sanding Sheet
(see figure E)
When attaching a new sanding sheet, remove
any dust or debris from the sanding plate
5 (e. g.
with a brush).
To ensure optimum dust extraction, pay atten-
tion that the punched holes in the sanding sheet
match with the holes in the sanding plate.
The sanding plate
5 is fitted with Velcro backing
for quick and easy fastening of sanding sheets
with Velcro adhesion.
Before attaching the sanding sheet
4 , free the
Velcro backing of the sanding plate 5 from any
debris by tapping against it in order to enable
optimum adhesion.
The machine is fitted with 2 sanding sheets that
can be changed individually, depending on the
degree of wear.
f Only use the machine when both sanding
sheets are mounted.
f
Only use sanding sheets with the same
grain size.
Position the sanding sheet 4 flush alongside one
edge of the sanding plate 5 , then lay the sanding
sheet onto the sanding plate and press firmly.
To remove the sanding sheet
4 , grasp it at one
of the tips and pull it off from the sanding plate
5 .
Sanding sheets of the Bosch Delta Sander can
be used.
Sanding accessories, such as fleece pads/pol-
ishing cloth pads, are attached to the sanding
plate in the same manner.
OBJ_BUCH-1201-001.book Page 20 Monday, May 31, 2010 1:04 PM