English |
23
Bosch Power Tools
1 609 929 X93 | (10.2.11)
When using a new cutting disc, the depth stop
must then always be set back to the original po-
sition.
f
Always adjust the depth stop in such a man-
ner that the cutting disc does not touch the
base plate when cutting.
– Bring the power tool into the working posi-
tion. (see “Releasing the Machine (Working
Position) (see figure C1)”, page 20)
– Loosen lock nut
29
with the supplied ring
spanner
13
(13 mm).
– Swing the tool arm with the handle
3
to the
requested position.
– Screw the depth stop
16
in clockwise or an-
ticlockwise direction until the screw head
touches the housing.
– Slowly guide the tool arm upward and tight-
en the lock nut
29
.
Transport
– Always carry the power tool by its transport
handle
17
.
f
The power tool should always be carried by
two persons in order to avoid back injuries.
f
When transporting the power tool, use only
the transport devices and never use the
protective devices.
Maintenance and Service
Maintenance and Cleaning
f
Before any work on the machine itself, pull
the mains plug.
f
Clean the ventilation slots of your power
tool regularly with a soft brush.
The motor
fan draws dust into the housing, and a large
accumulation of metal dust can lead to elec-
trical hazards.
f
In extreme conditions, always use dust ex-
traction as far as possible. Blow out ventila-
tion slots frequently and install a residual
current device (RCD).
When working metals,
conductive dust can settle in the interior of
the power tool. The total insulation of the
power tool can be impaired.
f
Have maintenance and repair work per-
formed only by qualified specialists.
In this
manner, it can be ensured that the safety of
the power tool is maintained.
The retracting blade guard must always be able
to move freely and retract automatically. There-
fore, always keep the area around the retracting
blade guard clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Accessories
Cutting disc . . . . . . . . . . . . . . . 2 608 602 752
Cutting disc . . . . . . . . . . . . . . . 2 608 600 946
After-sales Service and Customer As-
sistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
People’s Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 400 826 8484
Fax: +86 571 8777 4502
E-Mail: [email protected]
www.bosch-pt.com.cn
OBJ_BUCH-1373-002.book Page 23 Thursday, February 10, 2011 10:32 AM
