Bosch PMF 190 E, Оригинальное руководство пользователя

Страница: 14 / 92

14 | English
2 6 0 9 007 1 26 | (1 2 .4.13) Bosch Power Tools
The vibration e m ission level given in this infor m ation sheet
has been m easured in accordance with a standardised test
given in EN 6 0745 and m ay be used to co m pare one tool
with another. It m ay be used for a preli m inary assess m ent of
exposure.
The declared vibration e
m ission level represents the m ain
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or poorly
m ain-
tained, the vibration e m ission m ay differ. This m ay signifi-
cantly increase the exposure level over the total working
period.
An esti
m ation of the level of exposure to vibration should al-
so take into account the ti m es when the tool is switched off
or when it is running but not actually doing the job. This m ay
significantly reduce the exposure level over the total working
period.
Identify additional safety
m easures to protect the operator
fro m the effects of vibration such as: m aintain the tool and
the accessories, keep hands war m , organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in confor
m ity with the fol-
lowing standards or standardization docu m ents: EN 6 0745
according to the provisions of the directives 2 011/ 6 5/EU,
2 004/108/EC, 2 00 6 /4 2 /EC.
Technical file ( 2 00 6 /4 2 /EC) at:
Robert Bosch G m bH, PT/ETM 9 ,
D-70745 Leinfelden-Echterdingen
Robert Bosch G m bH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 0
6 .03. 2 013
Assembly
Changing the Tool

Before any work on the machine itself, pull the mains plug.

Wear protective gloves when changing application tools/accessories. Contact with the application tool/accessoriy can
lead to injuries.
Selecting the Application Tool/Accessory
The following table shows exa m ples for application tools. Further application tools can be found in the extensive Bosch acces-
sories progra m .
Dr. Egbert S chneider
S enior Vice President
Engineering
Hel m ut Heinzel m ann
Head of Product Certification
PT/ETM
9
Accessory Material Application
BIM seg m ent saw
blade
Wooden m aterials, plas-
tic, non-ferrous m etals
S eparating and plunge cuts; also for sawing close to edges,
in corners and hard to reach areas;
exa
m ple: shortening already installed botto m rails or door
hinges, plunge cuts for adjusting floor panels
Base plate for sand-
ing, series Delta
9 3 mm
Depends on sanding sheet S anding surfaces close to edges, in corners or hard to reach
areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
HC S plunge cut saw
blade, wood
Wooden m aterials, soft
plastics
S eparating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
exa
m ple: narrow plunge cut in solid wood for installing a
ventilation grid
HC S plunge cut saw
blades, wood
Wooden m aterials, soft
plastics
Sm aller separating and plunge cuts;
exa m ple: cut-outs in furniture for cable connections
BIM plunge cut saw
blades,
m etal
Metal (e.g. unhardened
nails, screws, s
m aller pro-
files), non-ferrous m etals
Sm aller separating and plunge cuts;
exa m ple: shortening narrow profiles, cutting fastening
ele m ents such as staples
OBJ_BUCH-345-009.book Page 14 Friday, April 12, 2013 11:38 AM