8
| English
1 609 92A 18T | (26.5.15)
Bosch Power Tools
Do not continue to press the On/Off switch after the cordless worklight has
been automatically switched off.
The battery can be damaged.
To remove the battery
4
, press the battery unlocking button
3
and pull the battery out
of the cordless worklight toward the rear.
Do not exert any force.
Observe the notes for disposal.
Operation
Initial Operation
Inserting the battery
Insert the charged battery
4
into the handle until it can be felt to engage and faces
flush against the handle.
Switching On and Off
The cordless worklight produces a light beam that emerges from the lamp
head 1.
To
start
the cordless worklight, press the On/Off switch
5
.
To
dim
the light of the cordless worklight, press the On/Off switch
5
again.
To
switch off
the cordless worklight, press the On/Off switch
5
again.
To save energy, only switch the cordless worklight on when using it.
Utility Hook(see figure B)
You can use the utility hook
2
to attach the cordless worklight to an object.
Swivelling the Lamp Head (see figure C)
The lamp head
1
can be swivelled up to 110° to suit the application.
Maintenance and Service
Maintenance and Cleaning
The light source cannot be replaced. If the light source is defective, the entire
cordless worklight has to be replaced.
When the battery is no longer operative, please refer to an authorised after-sales ser-
vice agent for Bosch power tools.
The cordless worklight is maintenance-free and contains no components that must be
replaced or maintained.
OBJ_BUCH-2513-001.book Page 8 Tuesday, May 26, 2015 11:49 AM
