Bosch PLE-SDT, Инструкция по установке и эксплуатации

Страница: 23 / 33

Plena Easy Line SD Tuner BGM source Operation | en 23
Bosch Security Systems B.V. Installation and Operation manual PLE-SDT_OM | V1.0 | 2012.02
keys (17, 20) (This is also necessary when all the files are in the ROOT directory without
folder).
– In this example, enter 1 as the folder number.
5. To memorize press the button PROG (9):
– The LCD (3) will show the track number (xxxx) flashing.
6. Select the number of the first track (xxxx) of the track sequence with the buttons |< –
SKIP – >| (6) or enter it with the remote control numerical keys (17, 20).
– For MP3 files in folders, please note that these files are not arranged consecutively
but that the first file in each folder is always number 1.
7. To memorize press the button PROG (9):
– The LCD (3) will show the next memory location number, e.g. “ P–02 ”.
8. Repeat the steps 3 up to 7 for all further tracks desired until the entire track sequence
has been programmed.
9. To start the track sequence, press the button >|| (10):
– The upper line of the LCD will show “ MEM ” (memory) and the track sequence will
be replayed.
10. Press the buttons |< – SKIP – >| (6) to select any track of the track sequence or keep the
corresponding button pressed to activate the fast forward/reverse function within a
track.
11. The replay will stop after the track sequence has been replayed or when you press the
button (8).
12. To restart the track sequence, first press the button (8), then press the button
PROG (9) and then the button >|| (10).
8.2.5 Muting the output sound
To mute the audio output sound (outputs: 30, 31) of the track during replay:
1. Press the button (4):
– The LCD lower line will show MUTE flashing continuously when the mute function is
activated.
2. To reactivate the sound, press the button (4) once again:
– The LCD (3) upper line will show " MUTE OFF " for 3 seconds.
A track sequence will be not stored when:
– you change from source (USB / SD / TUNER).
– you press the button (8) in the programming mode.
– you switch off the source unit (button 1).