Bosch PLE-SDT, Инструкция по установке и эксплуатации, Страница: 22 / 33

22 en | Operation Plena Easy Line SD Tuner BGM source
PLE-SDT_OM | V1.0 | 2012.02 Installation and Operation manual Bosch Security Systems B.V.
Selection of folders and search for folders
1. Select the source (USB device or SD/MMC card) with the button USB (13) or SD (14), if
necessary.
2. With files in several folders (file directories), press the button FOLDER (7) during the
replay to go to the first track of the next folder ( >>| ) or to the first track of the previous
folder ( |<< ).
3. If you stop the replay with the button (8) first and then press the button FOLDER |<<
or >>| :
– The upper line of the LCD (3) will show the folder name and the lower line will show
the folder number behind the directory symbol.
8.2.3 Repeat functions and random play
1. Select the source (USB device or SD/MMC card) with the button USB (13) or SD (14), if
necessary.
2. Press the button (11) to activate one of the repeat functions and the replay of the
tracks in random order:
– Basic setting (PLAY ALL): All tracks of the sound carrier or of a programmed track
sequence will be replayed once, then the replay will stop.
– 1st actuation of button (PLAY ALL RANDOM): The tracks will be replayed once in
random order.
– 2nd actuation of button (REPEAT TRACK): The track selected will be repeated
continuously.
– 3th actuation of button (REPEAT FOLDER): All tracks in the folder selected will be
repeated continuously.
– 4th actuation of button (REPEAT ALL): All tracks will be repeated continuously.
– 5th actuation of button (RANDOM REPEAT): All tracks will be replayed continuously
in random order.
– 6th actuation of button (PLAY ALL): Return to basic setting.
8.2.4 Making a playlist
For replaying a selection of tracks in a certain order, a sequence (playlist) of up to 64 tracks
can be programmed. For this purpose the arrangement of the folders should be known to you.
Refer to the previous Section Selection of folders and search for folders , as it will be necessary
to enter the corresponding number of each track to be programmed.
1. Select the source (USB device or SD/MMC card) with the button USB (13) or SD (14), if
necessary.
2. Stop the playing track by pressing the button (8).
3. Activate the programming mode with the button PROG (9).
– Press all other buttons within 15 seconds otherwise you will exit the programming
mode. In this case press the button PROG once again.
– The LCD (3) will show: "PROGRAM " in the upper line and "P-01 000 0000 " in the
lower line.
4. Select the number of the folder (xxx) containing the first track desired for the track
sequence with the buttons |< – SKIP – >| (6) or enter it with the remote control numerical
NOTICE!
At random play, the LCD (3) upper line will show RDM (left hand side) including the selected
random function symbol (right hand side). At repeat play, the LCD upper line will show the
selected repeat function symbol (right hand side).