Time-setting options
en
11
O
Time-setting options
Time-setting options
There are 2
different time-setting options:
■
Kitchen timer
■
Stopwatch
Kitchen timer
You can use the kitchen timer to set a time of up to
99 minutes. It runs independently of all the other
settings.
Setting the kitchen timer
1.
If the appliance is switched off, touch the
0
symbol
once; if it is switched on, touch the
0
symbol twice.
The
t
indicator lights up.
‹‹
min lights up on the
display.
Note:
When the appliance is switched on, pressing
the
0
symbol once switches on the stopwatch.
2.
Set the required time using the
‹
-
Š
buttons.
The timer starts counting down after a few seconds.
When the time has elapsed
When the time has elapsed, an audible signal sounds
and
‹‹
flashes in the display for 10 seconds. The
t
indicator flashes.
Touch any symbol.
The indicators go out and the audible signal ceases.
Setting the correct time
Use the
0
symbol to select the kitchen timer and reset
the time.
Stopwatch
The stopwatch displays the time that has passed since
it was activated.
The stopwatch only works when the appliance is
switched on. When the appliance is switched off, the
stopwatch is switched off as well.
Note:
If the kitchen timer is selected in addition to the
stopwatch, the setting will appear on the timer display
for 10 seconds. The stopwatch will then be displayed
again.
Switching on
1.
Touch the
0
symbol.
‹‹
is shown on the display.
2.
Touch the buttons for temperature control.
Timing starts. Seconds are displayed during the first
minute, then minutes. After 10 seconds the timer
display goes out and the temperature is shown.
3.
Touch the
0
symbol to show the timer display
again.
Switching off
1.
Touch the
0
symbol.
The timer display will be shown.
2.
Touch the temperature setting buttons.
The stopwatch will be switched off. The timer display
will go out.
b
Automatic safety cut-out
Automatic safety cut-out
If an appliance has been switched on for a long time
without the setting being changed, the automatic switch-
off is activated.
The appliance stops heating.
”
‰
and the residual heat
indicator
•
/
œ
flash alternately on the display.
The indicator goes out when you touch any of the
controls. You can implement new settings.
When the time limit is activated depends on the
temperature selected (2
to 4 hours).
[
Energy consumption
indicator
Energy consumption indicator
You can use this function to display the total energy
consumption between switching the appliance on and
off.
Once switched off, the energy consumption in kilowatt
hours (e.g. 1.87 kWh) is displayed for 10 seconds.
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The energy consumption display may not be
activated.
Содержание PKY475FB1W
Страница 2: ......
