Bosch PIV N Series, Инструкция по эксплуатации, Страница: 9 / 16

9
Flexible zone
This may be used as a single zone or two individual zones
depending on the cooking needs in each situation.
It consists of 4 independently-controlled inductors. When the
flexible zone is working, only the zone covered by the cookware
is activated.
Advice on using cookware
To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
Warnings
When using cookware of a different size or made of a different
material, noise and vibrations that do not affect the correct
working of the zone may occur.
As one hotplate
The flexible zone is normally used as one single hotplate.
How to activate
The hob must be switched on.
1.
Select the flexible zone with the
Á
or
Â
symbol. The
indicator
‹
.
‹
lights up.
2.
Select the power level in the programming zone.
The flexible zone is switched on.
Changing the power level
Change the desired power level in the programming zone.
Adding more cookware
Select the flexible zone then press and hold the
Ä
symbol until
the cookware is detected. The previously selected power level
is maintained.
Note:
If the pan on the hotplate that is switched on is moved or
removed, the hob will perform an automatic search and the
previously selected power level will be maintained.
To deactivate
Select the hotplate and press the 0 symbol.
As two hotplates
The flexible zone can be used as two independent hotplates.
How to activate
The hob must be switched on.
1.
Select the flexible zone then press the
Ã
symbol.
The indicator
b
lights up between the
Á
and
Â
symbols.
2.
Select one of the hotplates in the flexible zone. The indicator
‹
.
‹
lights up.
3.
Select the power level in the programming zone.
How to deactivate
Select the hotplate and press the 0 symbol. The hotplate
switches off.
Note:
When a hob is switched off and switched on again, the
flexible zone returns to being one single hotplate.
As one hotplate
Diameter less than or equal to 13 cm
Place the cookware on one of the four posi-
tions shown in the image.
Diameter greater than 13 cm
Place the cookware on one of the three
positions shown in the image.
If the cookware takes up more than one hot-
plate, place it at the top or bottom edge of
the flexible zone.
As two independent hotplates
The front and back hotplates, each with two
inductors, can be used independently by
selecting the necessary power for each
one. In this case, it is recommended to only
use one pan on each hotplate.
To obtain maximum power with the
Powerboost Function, place the
cookware in the centre of the flexi-
ble zone when used as a single hot-
plate.
On hobs with more than one flexible
zone, it is not recommended to use
several zones at the same time for a
single pan.