Bosch PIV N Series, Инструкция по эксплуатации, Страница: 11 / 16

11
Changing or cancelling the time
Select the hotplate and press the 0 symbol twice.
The __ and r displays appear
Change the cooking time using symbols
1
to
9
or press
0
to
cancel the time.
Once the time has elapsed
The hotplate switches off once this time has elapsed. A beep is
heard and
‹
.
‹
appears in the hotplate and the time
programming function display shows
‹‹
for 10 seconds.
When the
0
symbol is pressed, the displays turn off and the
beep goes off.
Notes
■
If a cooking time has been programmed, the display always
shows the time of this function. To check the cooking time
remaining in a hotplate, select a hotplate and press the
0
symbol twice.
■
If a time has been programmed for several hotplates, the
time of the selected hotplate is always shown.
■
Any cooking time can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1.
Press the
0
symbol. The indicator
U
lights up.
‹‹
lights up
in the time program function display.
2.
Set the required time using symbols
1
to
9
.
The time starts again after a few seconds.
Once the time has elapsed
Once the time has elapsed, a beep will sound. ‹‹ and U are
displayed in the time program function display. After pressing
the 0 symbol, the indications turn off.
Changing or cancelling the time
Press the
0
symbol, the
U
indicator lights up.
Change the time using the
1
to
9
symbols or press
0
to cancel.
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
>D
symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note:
The lock does not affect the main switch. The hob may
be switched off when desired.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
”‰
symbol and the residual
heat indicator
œ
/
•
flash alternatively in the display.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
™‚
Childproof lock
‹
Deactivated.*
‚ Activated.
™ƒ Audible signals
‹ Confirmation and error signals deactivated.
‚
Only confirmation signal deactivated.
ƒ All signals activated.*
™†
Automatic programming of cooking time
‹
Switched off.*
‚ - ŠŠ Automatic shut-off time.
™‡ Duration of the time program function warning signal
‚ 10 seconds*.
ƒ
30 seconds.
„ 1 minute.
*Factory settings