Bosch PIR N Series, Инструкция по эксплуатации

Страница: 12 / 16

12
Accessing the basic settings
The hob should be switched off.
1.
Turn on the hob with the main switch.
2.
In the next 10 seconds, hold down the 0 symbol for 4
seconds.
™‚
is displayed on the left of the screen and
‹
on the right.
3.
Press the 0 symbol until the indicator for the required
function is displayed.
4.
Next select the setting required with symbols
0
to
9
.
5.
Press the
0
symbol for 4 seconds.
The settings will have been properly saved.
Leaving the basic settings
Turn off the hob with the main switch.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
■
Undiluted washing-up liquid
■
Dishwasher detergent
■
Abrasive products
■
Corrosive products such as oven sprays or stain removers
■
Sponges that may scratch
■
High-pressure or steam cleaners
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
■
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
™‡
Duration of the time program function warning signal
‚
10 seconds*.
ƒ 30 seconds.
„
1 minute.
™ˆ
Power-Management function
‹
= Deactivated.*
‚ = 1,000 W. minimum power.
‚
.= 1,500 W.
ƒ = 2,000 W.
etc.
Š
or
Š
. = maximum power of the hob.
™Š Hotplate time selection
‹ Unlimited: the last hotplate programmed remains selected.*
‚
Limited: The hotplate will only remain selected for 10 seconds.
™‹
Return to basic settings
‹
Personal settings.*
‚ Return to factory settings.
Indicator Function
*Factory settings