16
| English
2 609 140 721 | (8.3.11)
Bosch Power Tools
Products sold in GB only
: Your product is fitted
with a BS 1363/A approved electric plug with in-
ternal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only
: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all in-
structions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for planing of firmly
supported wooden materials, such as beams
and boards. It is also suitable for beveling edges
and rebating.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Planing depth scale
2
Depth adjustment knob (insulated gripping
surface)
3
Chip ejector (alternatively right/left)
4
Lock-off button for On/Off switch
5
On/Off switch
6
Chip ejection selector lever
7
Planer base plate
8
V-grooves
9
Handle (insulated gripping surface)
10
Blade drum
11
Clamping element for blade
12
Fastening screw for planer blade
13
Carbide blade (TC)
14
Allen key
15
Extraction hose (Ø 35 mm)*
16
Chip/dust bag*
17
Parallel guide
18
Scale for rebating width
19
Locking nut for adjustment of rebating
width
20
Fastening bolt for parallel and beveling
guide
21
Angle stop*
22
Locking nut for angle adjustment*
23
Fastening bolt for rebating depth stop*
24
Rebating depth stop*
25
Park rest
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Planer
PHO 3100
Article number
3 603 B71 ...
Rated power input
W
750
Output power
W
420
No-load speed
min
-1
16500
Planing depth
mm
0 – 3.1
Rebating depth
mm
0 – 9
Planing width, max.
mm
82
Weight according to
EPTA-Procedure
01/2003
kg
2.6
Protection class
/
II
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-406-003.book Page 16 Tuesday, March 8, 2011 8:05 AM
