Before conversion the cooktop must be disconnected
from the electricity and gas valves must be turned to the
OFF position.
1 Remove the trivets, burner caps and burner heads.
2 Change the injectors using a 7-mm socket wrench
and be sure to tighten them down properly so that
3 Re-assemble the burner component parts in reverse
order.
Natural Gas
Burner
Injector
size
(mm)
Injector
size
(mm)
(MJ)
Small
Medium
Large
0.90
1.18
0.50
0.67
0.85
0.97
To change injectors
All work involved in installation, setting and adaptation
to a different gas type must be carried out by authorised
personnel from our Service Centre and must comply
the local gas company.
Request change-over injectors from our customer service
deparment (refer injector chart below for sizes).
Coverting the cooktop
from Nat.Gas to
NOTE: it is not necessary to adjust the primary air control
on these burners.
6
7 mm
Hourly Gas
(MJ)
4,0
Refer Fig. .
7
they are fully airtight. Refer Fig. .
8
8
7
1.55
wok (Center or
Left)
Univcersal LPG
with current regulations and the conditions laid down by
Universal LPG
6,5
14,0
11.5
3,25
6,25
13,25
Hourly Gas
1.70
9.5
11
Co
n
sumption
Co
n
sumption
