Bosch NPD-6001A, Руководство по установке

Страница: 14 / 24

Installation
!
Caution!
Installation must be made by qualified personnel and conform
to ANSI/NFPA 70 (the National Electrical Code
®
(NEC)),
Canadian Electrical Code, Part I (also called CE Code or CSA
C22.1), and all applicable local codes. Bosch Security Systems,
Inc. accepts no liability for any damages or losses caused by
incorrect or improper installation.
!
Warning!
FOR INDOOR USE ONLY
Place the midspan on a desktop, or mount it to a wall, a bench,
or a shelf using the mounting holes in the bottom of the device.
Before mounting the midspan to a fixed location, note the
following:
–
Do not cover the midspan or block the airflow to the PoE
with any foreign objects.
– Keep the midspan away from excessive heat and humidity
and free from vibration and dust.
– Ensure that the cable length from the Ethernet network
source to the terminal does not exceed 100 meters (333
feet). The midspan is not a repeater and does not amplify
the Ethernet data signal.
– No “on-off” switch exists; simply plug the midspan into an
AC power source.
Mount the Unit Directly to a Flat Surface
1.
Select the mounting location and surface. Ensure that the
selected surface will be able to support the weight of the
unit (400 g / 0.88 lb). Note that this unit is intended only
for installation in a Restricted Access Location.
4
14 en | Installation High PoE Midspans
2015.06 | 3.1 | F.01U.304.912 Bosch Security Systems