Cooktop-based hood control
en-us
21
7.7 Wi-Fi module
FCC/IC Statements
Model:
COM2
FCC ID:
2AHES-COM2
IC ID:
21152-COM2
The Home Connect™ Wi-Fi module is a communication
device designed to provide communication between appli-
ances and smart devices.
This module is integrated at the factory, under direct con-
trol of BSH Home Appliances Corporation, and is not user
serviceable or upgradable. At least 7⅞ inch (20 cm) sepa-
ration distance should be maintained from device to user.
FCC COMPLIANCE STATEMENT
CAUTION
Changes or modifications not expressly approved could
void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
¡
This device may not cause harmful interference, and
¡
This device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada license exempt
RSS standard(s).
Operation is subject to the following two conditions:
¡
This device may not cause interference, and
¡
This device must accept any interference, including in-
terference that may cause undesired operation of the
device.
Cooktop-based hood control
8 Cooktop-based hood control
Cooktop-based hood control
You can connect your appliance to a hood and, in this
way, control the functions of your appliance via the cook-
top.
If both appliances are Home Connect™ compatible, the
easiest way to connect the appliances is in the Home Con-
nect™ app. To do this, connect the two appliances to
Home Connect™ and follow the instructions in the app.
Alternatively, you have the following options for connecting
the appliances together:
¡
Connecting the appliances directly.
¡
Connecting the appliances via your home network.
Notes
¡
Make sure you follow the safety instructions in the As-
sembly Instructions for your hood and that these are
complied with even when operating the appliance via
the hood controls on the cooktop.
¡
If the appliance is being operated by means of the con-
trols on the hood, this mode of operation always has pri-
ority. It is not possible to use the hood controls on the
cooktop during this time.
¡
In networked standby mode, your appliance requires a
maximum of 2 W.
8.1 Connecting appliances directly
Connect the appliance directly to your hood to control the
hood via the cooktop. If you connect your cooktop directly
to the hood, it cannot be connected to your home network
as well and you will not be able to use Home Connect™.
Note:
Note the information for connecting the cooktop in
the Assembly Instructions for your hood.
Requirement:
The hood is switched off.
1.
Turn on the cooktop.
2.
Press and hold
kitchen timer
for 4 seconds.
a
The product information is displayed.
3.
Press
kitchen timer
repeatedly until and are dis-
played alternately.
a
lights up on the cooking zone display.
4.
Select the settings value in the settings area.
a
is blinking on the cooking zone display.
5.
Within 2 minutes, initiate the connection process on the
hood. Refer to the operating instructions of your hood.
a
When the connection is completed lights up on the
cooking zone display.
a
The hood control icons light up on the control panel.
6.
Exit the basic settings.
Note:
You can change the settings anytime in the basic
settings menu.
8.2 Connecting appliances via your home
network (Wi-Fi)
If the appliances are connected to each other via your
home network, you can operate the hood via the cooktop
controls or with Home Connect™.
Note:
The appliances can only be connected when both
are connected to the home network and are simultane-
ously engaged in connecting. If the time allowed for con-
necting has already expired for one of the two appliances,
start the connection process again.
Requirements
¡
Your router has a WPS button. You will find information
about this in the manual for your router.
¡
The hood is connected to the same home network (Wi-
Fi).
1.
Turn on the cooktop.
2.
Press and hold
kitchen timer
for 4 seconds.
a
The product information is displayed.
3.
Press
kitchen timer
repeatedly until and are dis-
played alternately.
a
(not connected) or (connected to home network)
lights up on the cooking zone display.
4.
Select the settings value in the settings area.
a
is blinking on the cooking zone display.
5.
If the appliance is not yet connected to your home net-
work, press the WPS button on the router within the
next 2 minutes.
a
The cooktop is connected to your home network.
lights up on the cooking zone display.
6.
Initiate the connection process on the hood within the
next 2 minutes.
a
When the connection is completed lights up on the
cooking zone display.
a
The hood control icons light up on the control panel.
